Cisco Access-Point Aironet
In Cisco Aironet there are two modes for pengoperasionalnya, namely
Leighweight Access Point (LAP), in the LAP for pengoperasionalnya use Controller for centralized AP management of the call with WLCAutonomous Access Point (AAP), in the AAP is not required Controller, so each AP has each management
To make the AP becomes AAP we need a special IOS, because 2 there are two automatic operating mode for iOS also there are 2 types also
IOS that supports LAP in IOS naming no code W8IOS supporting AAP in IOS naming no code W7
To turn on the AP there are three ways, namely:
By using PoE switch, this way the AP to get electricity from the UTP cable which in UTP cable is no data traffic and traffic listrikDengan using a power injector, this way cucok for switches that do not support PoE and in the AP her exactly as number 1 is the difference in power injector for UTP cables that had no electricity, the traffic will be made to supply power to APDengan using a power adapter, this way cucok also for switches that do not support PoE, in this way there is an outlet which must be fitted on AP
To access the Cisco Aironet No 2 carai, namely:
Web based, we enter default ip 10.0.0.1 and definitely on the client must be installed ip also one subnet with his AP. And certainly the appearance is GUIConsole, this way certainly zoom text or better known as CLI, we insert the commands to activate the AP as we want
Generally Cisco Aironet features dual band 2.4 GHz and 5GHz frequency ie. and dual band can be seen from the model Aironet, if the final figure 2 means supporting dual band, if the value of 1 means that only a single band, for example Cisco Aironet 1602 series, 3502
of the series to be seen whether Cisco also uses an internal antenna or external antenna, for example:
* Cisco Aironet 1602i series, which means the Aironet 1600 series that supports dual band and internal antennae
* Cisco Aironet 3502e, which means Aironet 3500 series supports dual band and external antennae
Pictured above is an example of Cisco Aironet Series 3502e, which saw the place for the installation of an external antenna
Pictured above is the Cisco Aironet 3502e looked down, looked there already signified by the numbers and the following is the explanation here is called the mode dial one of its functions to upgrade or downgrade iosport create console for remote device langsungport ethernet for data traffic and can also create electric traffic if used at the ends injectorport PoE switch or power to create electricity using a power adapter so the introduction of the Cisco Aironet this is still far from perfect, please if there are additional resources may be useful again
Regards,
team Freegprsnetwork
Ok, That's all about Cisco Access-Point Aironet Thank you for visiting, and have a nice day
Cisco Access-Point Aironet
0 komentar:
Post a Comment