Kumpulan Tutorial networking , Trik dan Tips

Monday 9 November 2015

DTP (Dynamic Trunking Protocol)

DTP (Dynamic Trunking Protocol) - Hallo my friends,, This post is entitled DTP (Dynamic Trunking Protocol), All of the content is aim for reader satisfaction. Hopefully all the posts will be easy to understand and likeable.

Dynamic Trunking Protocol


DTP (Dynamic Trunking Protocol)
Dynamic Trunking Protocol is a proprietary network protocol developed by Cisco Systems aimed at negotiating objectives VLAN trunking links between two switches, and to negotiate the type of trunking encapsulation that will be used. It works at Layer 2 of the OSI model. VLAN formed using DTP can use both trunking ISL protocol from Cisco IEEE 802.1Q or kemampun to a door may be turned into stem mode, because the DTP has two dynamic state is self desirable and dynamic
1. Dynamic desirable: to start the formation of the log, and also to answer if there is a DTP packet from the other direction
2. Auto dynamic: not boot but he asked if there DTP package from another direction
for the trunk


1. In the second inter-port switch is manually set so trunk
2. In the second inter-port switch is set to desirable dynamic
could be due to each trunk port sends signals DTP and port responds to signals DTP
3. a door desirable dynamic assembly and the opposing ports defined dynamic self
may be a door in the trunk because the desirable dynamic set will send a DTP and ports opponent signal that established the self responds dynamic
4. the ports in a desirable dynamic assembly and the opposing ports in the trunk September
may be a door in the trunk because the desirable dynamic set know your opponent has become the trunk, then it will set the port to trunk
5. in one of the ports in the trunk and port define your opponent set dynamic auto
It could be the trunk as the trunk sends signals DTP and in response to dynamic self-
trunk will not happen if
1. in one of the ports in the trunk and port set your opponent on the access game
It can not be a trunk because he was not able to access ports initiate or respond DTP signals
2. In the second inter-port switch is defined as a dynamic self-
can not be a trunk because the signal does not boot DTP, they are just waiting for the signal alone DTP
Freegprsnetwork



Ok, That's all about DTP (Dynamic Trunking Protocol) Thank you for visiting, and have a nice day

DTP (Dynamic Trunking Protocol)
Share on Facebook
Share on Twitter
Share on Google+

Related : DTP (Dynamic Trunking Protocol)

1 komentar:

Unknown said...

materi is good man thx